상품명 | 피베이 Peavey IMPULSE 12D(1조) |
---|---|
제조사 | 피베이 |
판매가 | 3,000,000원 |
상품코드 | P0000COK |
수량 | |
상품요약정보 | 1통1200W 12인치 2웨이엑티브스피커 |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
제품설명
Impulse 12D는 2-way 12인치 스피커로 최대 1,200W를 출력하는 IPR ™ 전력 증폭기 기술을 적용한 스피커입니다. IPR 증폭기는 경량의 스위치 모드 전원 공급 장치와 사용할 수있는 최고의 오디오 해상도와 효율성을 산출 고속 클래스 D topology로 설계되었습니다. DynaQ 섹션은 특별히 프로그램 음악 구성 등 전반적인 음의 크기의 향상과 Bass Enhancer - 각 오디오 입력에 최적화된 EQ 설정을 제공하는 음악/ 음성 스위치 – 고급컨트롤을 제공합니다.
Specifications
- Frequency response : 52 Hz to 20 kHz
- Usable low frequency limit (-10 dB point) : 52 Hz
- Internal power amplifiers (@120 VAC line):
Woofer - 1200 watts peak available power Continuous Power : 550 watts
@ less than 1% distortion
Tweeter - 150 watts peak available power Continuous Power : 75 watts
@ less than 1% distortion.
- Nominal sensitivity (1W @1M, swept sine input in anechoic environment) :
100 dB (average)
- Maximum sound pressure level : 131 dB music peak
- Nominal radiation angles : 100˚ horizontal by 30˚ vertical
- Transducer complement : 12” Neodymium Dual Voice Coil Scorpion® woofer,
Model SDC1288 and RD™2.6 with 4.75” long aluminum composite ribbon tweeter
- Box tuning frequency (Fbox) : 61 Hz
- Electroacoustic crossover frequency : 2,000 Hz
- Crossover type : Internal Electronic two-way crossover with driver EQ, level
matching, bass boost and subsonic filtering.
- Crossover Slopes : 24 dB/octave (fourth order) low pass, 24dB/octave (fourth
order) high pass, both with staggered poles and driver EQ. Unit has horn spatially
aligned with woofer, so there is no need for phase alignment or time delay of the
signals.
- Electronic Input Impedance (Nominal):
10 k ohms unbalanced
20 k ohms balanced line level
2.4 k ohms balanced mic level
- Input Connections :
Input 1 : One combo female XLR/ 1/4” phone jack providing balanced
operation, with switch-selectable mic- or line-level sensitivity.
One 3-conductor balanced Euro-style jack connector
Input 2 : One combo female XLR/ 1/4” phone jack providing balanced operation, with switch-selectable mic- or line-level sensitivity.
Two RCA phono-type jacks, which are buffered and mixed to monophonic for a summed signal. These are NOT a stereo input, as the Impulse® 12D is a single full-range sound source.
- Output Connections : One male XLR balanced output, one ¼” TRS balanced phone
type jack, one 3-conductor balanced Euro-style jack connector.
- Cabinet material : Injection-molded polypropylene with internal ribbing and
bracing, and with textured finish. Molded material is dark gray, as is the metal
grille. Available in a white version as well.
- Dimensions / Weight : 397(W) x 632(H) x 391(D) (mm) / 17.7kg